RAPID BIKE SYSTEMS

The new Rapid Bike EVO2 represents a significant advancement over the previous model, the Rapid Bike EVO. Thanks to a faster microprocessor, reduced size and weight, and the ability to modulate the signal in both Narrow Band and Wide Band, it offers improvements in terms of quality and reliability. 

One of the main innovations is the intuitive APP manageable via smartphone. In addition to these new features, the Rapid Bike EVO2 retains all the advanced characteristics already present in the Rapid Bike EVO. The lambda sensor signal management ensures the fine-tuning of the exclusive auto-adaptive function: fuel mapping is automatically updated while riding the vehicle.

The injection map becomes a dynamic and flexible factor, perfectly adapting to changing weather conditions and driving styles. The most significant benefits occur at low and mid-range RPMs, correcting engine hesitations caused by increasingly strict anti-pollution regulations.

The most innovative aspect of the new Rapid Bike EVO2 is the ability to select 3 customizable riding modes via the APP, each with 20 intensity levels:

• Eco: reduced performance to promote significant fuel savings
• Touring: optimized for urban riding, offering a balance between performance and efficiency
• Sport: maximum power and performance for a sporty riding experience 

Additionally, the diagnostic function has been introduced, useful for reading the main errors in the original ECU and possibly clearing them. 

The new Rapid Bike Racing 2

We started with the complete fuel mapping control of the Rapid Bike EVO2 and added all the functionalities needed to be a reference in the racing sector:

• ADVANCE MAPPING with pick-up signal management for precise and accurate control of injection and ignition phases
• ENGINE BRAKE managed during deceleration, to eliminate rear wheel hopping during braking and improve vehicle stability in corners
• PIT-LANE LIMITER activatable with a handlebar switch, to reduce power output and maintain a constant speed in the pit lane
• DUAL SETTING for optimizing the main engine parameters, thanks to the ability to select the best setting between two different presets in real time.

Rapid Bike EVO add-on module puts in your hands total control of fueling operations as it is directly connected to all stock injectors (up to eight) while managing at the same time the corresponding air/fuel ratio. In this way, the carburetion values can be modified throughout the entire engine power delivery curve.

The ability to manage the stock lambda sensor signal allows performing the exclusive auto-adaptive feature to ensure that fueling is constantly adjusted while riding the vehicle. The injection map becomes a dynamic value in order to match the changing weather conditions and driving style. This function is highly beneficial at low and medium rpm, where the engine performance is poorly limited due to more and more restrictive anti-polluting regulations.

Rapid Bike EVO add-on module puts in your hands total control of fueling operations as it is directly connected to all stock injectors (up to eight) while managing at the same time the corresponding air/fuel ratio. In this way, the carburetion values can be modified throughout the entire engine power delivery curve.

The ability to manage the stock lambda sensor signal allows performing the exclusive auto-adaptive feature to ensure that fueling is constantly adjusted while riding the vehicle. The injection map becomes a dynamic value in order to match the changing weather conditions and driving style. This function is highly beneficial at low and medium rpm, where the engine performance is poorly limited due to more and more restrictive anti-polluting regulations.

Rapid Bike EVO supports quick shifter sensor (optional), multiple maps management, raising RPM limiter* (up to 1000 rpm*) and the elimination of speed limiter*. *NOT AVAILABLE FOR ALL MODELS.
For twin cylinders engine equipped with double lambda sensors, it is possible to develop a specific injection map as well as an auto-injection remapping set specific for each cylinder.

New Rapid Bike SMART2 add-on fueling kit is specifically designed to improve the performance of the newest motorcycle models equipped with highly sophisticated lambda sensors complying with the latest European homologation criteria.

This technology directly controls the lambda sensor signal in order to prompt the stock ECU to adopt a richer carburetion over the entire delivery power curve, while securing substantial benefits for the engine's overall performance.

Rapid Bike SMART technology introduces an innovative concept of software management with user-friendly parameters specifically designed to amplify or reduce the effects of the stock lambda sensor signal modification. 

The most innovative aspect of the new Rapid Bike Smart2 is the ability to select 3 customizable riding modes via the APP, each with 20 intensity levels:

• Eco: reduced performance to promote significant fuel savings
• Touring: optimized for urban riding, offering a balance between performance and efficiency
• Sport: maximum power and performance for a sporty riding experience 

Additionally, the diagnostic function has been introduced, useful for reading the main errors in the original ECU and possibly clearing them.

Rapid Bike EASY add-on electronic module is equipped with a microprocessor managing directly the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate the torque and power gaps typical of the low and medium rpm.

Install your EASY module to the stock lambda sensor connector and check for operating status thanks to a LED. Now you are ready for the module fine-tuning: this is a very simple procedure (using two easily accessible trimmers) without any need for additional software operations.
The EASY add-on module can manage up to two lambda sensors, and it is designed especially for motorbikes with a standard configuration.

MY TUNING BIKE:  

My Tuning Bike is the best tool for performing a real-time injection auto-remapping, according to a specific air/fuel ratio target. The peculiarity of this tool is the time required to perform the auto-remapping operation, thanks to the CAN-BUS line and a wide-band lambda sensor. The injection values are instantly modified to respond immediately to the changing climatic conditions and road styles.

Attention: My Tuning Bike, combined with the Rapid Bike EVO and Rapid Bike RACING add-on modules, remains bound to the single control unit.

SHIFT-ASSIST:

 OPTIONAL EVO - RACING Latest Rapid Bike SHIFT ASSIST represents a big step forward in terms of quick-shifting solution, thanks to a further technological development to perform up-shifting (traditional mode) as well as down-shifting operations (the so-called ‘blipper’, available only for bike models equipped with ‘ride by wire’). A new device reaching unmatched technical standards designed to deliver outstanding performance to race track enthusiasts and further improve riding experience.

YOUTUNE: 

YouTune is the handlebar-mounted controller putting a technological revolution in your hands. A compact and innovative calibration device allowing to customize your bike’s performance in real time, whether you are on the street or on a race track.

To be purchased as a separate accessory for installation with:

• Rapid Bike Evo
• Rapid Bike Racing
• Rapid Bike Evo2
• Racing Racing2

To be purchased as a separate accessory for installation with Rapid Bike EVO and Rapid Bike RACING modules.

- Modifying target of AIR/FUEL RATIO PARAMETER for auto-remapping fuel adjustments. Displaying air/fuel ratio value and changing its target in real time (with My Tuning Bike installed)
- Fine tune modulation of QUICK-SHIFTING kill time
- DISPLAYING THE MAIN ENGINE PARAMETERS: RPM, TPS, AFR, OEM Lambda Status, Gear – also TC and EB operating.
- RPM/SPEED CONTROL activation to maintain constant cruising, a very useful tool to drive comfortably even in traffic jams, areas with speed-traps cameras, etc
- Modulation of ENGINE BRAKING (now available also for Rapid Bike EVO)
- TRACTION CONTROL* activation and fine tuning modulation of its effectiveness
- LAUNCH CONTROL* activation to enable and modulate settings for a 'flying start'

YouTune is the handlebar mounted controller putting a technological revolution in your hands. A compact and innovative calibration device allowing to customize your bike’s performance in real time, whether you are on the street or on a race track.

To be purchased as a separate accessory for installation with:

• Rapid Bike Evo
• Rapid Bike Racing
• Rapid Bike Evo2
• Racing Racing2

ADORI BYPASS ADAPTOR:

 A by-pass replacing the RapidBike module (ADapter recreating ORIginal conditions) and setting the bike to stock conditions without removing the wiring harness. In this way, it is possible to have an immediate comparison of the bike performance in real driving conditions. Very useful in areas with severe restrictions for installing high-performance accessories.