RB EASY KTM
Please Note: Rapid Bike EASY module ONLY effective and works in closed loop area where most of fueling glitches occur. Closed course / off road use only. Not EPA or C.a.r.b. approved.
This is a very simple yet efficient inexpensive tuning solution. If you feel your bike needs a full-on tuning solution and the fueling issues are beyond closed loop area, PLEASE consider RB EVO or RB Racing system. If you are unsure about what you might need , e-mail us at email@example.com
Rapid Bike EASY add-on electronic module is equipped with a microprocessor managing directly the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate the torque and power gaps typical of the low and medium rpm.
Simply PLUG & PLAY! Install your Easy module inline with stock lambda sensor/s connector and check for operating status.
Now you are ready for the module fine-tuning: this is a very simple procedure (using two trimmers easy to access) without any need for additional software operations.
Easy add-on module can manage up to two lambda sensors, and it is designed especially for motorbikes with a standard
configuration. Improve power delivery while keeping fuel consumption under.