RB EVO 01-06 R1150 RS / RT / ST
All Rapid Bike products
are for closed-course competition use only.
Kit including the
Rapid Bike Evo module and the USB cable and model specific wiring harness
.
The Evo module manages up to 8 injectors and
modulates the signal up to two O2 sensors (up to 2 lambdas). The purpose of the
O2 sensor (lambda) modulation is to prevent the stock ECU from recognizing the adjustment
applied by the Rapid Bike module to the injection map without any further
attempts to re-set the stock parameters matching the criteria fixed by the
restrictive exhaust gas emission laws.
When riding the motorcycle,
the self-adaptive feature determines the automatic self-correction of
the air/fuel ratio maps: this active management is added up to the pre-set
parameters. The adjustments set by Rapid Bike EVO improve the engine
efficiency in order to reach the best performance. The self-correction process
is set in multi point technology according to RPM and TPS, for the whole range
of the engine working, even when the original RPM limiter is raised (when
available).
Modulating the stock O2 sensor (lambda)
signal is a technology far more advanced than the so called “O2 sensor
eliminator” (or any other similar device used by the competitors) since they
send a static/constant signal which is in conflict with the typical behavior of
the lambda sensors, therefore causing the main ECU to perceive such a constant
signal as a mistake to be corrected. Thanks to Rapid Bike exclusive technology
for the modulation of the stock lambda signal the main ECU considers this
behavior as standard; therefore it will not try to re-set the stock engine
parameters.
The Evo module is universal (same as RACE module),
this means that it can be installed on all the motorcycle models listed in the
applications list (once it is properly programmed using the professional
software Rapid Bike Master PRO (sold only to dealers/tuners). HOWEVER,
FREE version of the software is always provided with a purchase of a Rapid Bike
System.
It can remove
the speed limiter and to increase the rpm limiter up to 1000 rpm more than the
stock one (both features are not
available for all bike models). It has an accelerator pump
feature.
The Evo module’ s most important benefit is
the so-called Auto-adaptive feature, that is the ability to correct
automatically the injection map adjustment by reading the signal of the
stock O2 sensor (lambda) while riding the bike.
QUICK SHIFT READY , Race and Evo systems are quick shift ready
which means no need to buy additional modules all you need is an RB quick shift
sensor.
All Ducati Panigale 1199 and 899 Race or Evo systems control both O2
sensors which provide individual cylinder mapping and adaptive fuel injection
tuning.